In my continued mission to squeeze value from the MN Dawn Curve pattern until it squeaks, I’ve made another pair of Dawn shorts. I’m not the only one confused by shorts this year, but I figured I couldn’t go wrong with denim – even better, leftover denim from all the other pants I’ve made recently. I had large scraps and more than a little hankering for the bi-color/parti-color/jester trend, so blammo!
These are all rigid denims. The light blue is 10 oz.; the dark blue is 8 oz.; the black used as one back leg is also 8 oz.; and the other black denim is 5 oz. I used that just for the back pockets, coin pocket, and belt loops. I cut those lightweight pieces first and set them aside. Everything else I cut improvisationally. This is the first time I’ve sewn Dawns without tweaking the fit or trying a new view, so I felt good about experimenting elsewhere.
I prioritized making the back from the dark scraps to a) minimize underwear show-through and b) in case I sat in something. I haven’t sat in something, but summer isn’t over yet. I probably could have brought one more light element to the rear, but I love black and blue together, and hopefully wrapping the dark blue to the front makes the front and back feel less separate.
I actually cut belt loops from every fabric and decided to make a call on which to use later, but there’s something to be said for sewing loops from a lighter coordinating fabric. It was so much easier to get through those layers.
You can see I’ve got buckling in the back yoke, but I’m starting to believe this is inevitable in rigid jeans. They just slump after the first day of wear (this is day 2 or 3 for these shorts – non-consecutive, if you’re asking!) but otherwise they wouldn’t fit on day 1 and I’d never get to day 2 anyway!
Oh also, when I sewed my muslin of this in the winter, I noted that the shorts back leg outseam is 1” longer than the front outseam. This time I eased them together, but is that a thing? Easing the outseams? I guess it keeps the hem parallel to the grainline, but it seemed like a lot of excess to ease over a relatively short seam (compared to a full-length pants leg).
I tried the MN button fly directions for this pair. I would class them as effective but inefficient. You’ll be switching between regular thread and topstitching thread way more than necessary if you follow them to the letter, and I know this because I did. I used a hodgepodge of bobbin threads but topstitched each denim tonally, except the light blue; I didn’t have any light blue thread, hence the gold.
Surprisingly the pattern only calls for 3 buttons or rivets on the fly, plus 1 on the waistband – and it was enough! I typically use 5 on the placket, but it’s so much faster to get in and out with just 3 that it makes me 60% more likely to pee. Oh, and my pocket bags are scrap cotton with shades of blue and grey. I’m feeling preeetty happy with the insides of these shorts.
I’ve been using a straight waistband with this pattern, which made it really easy to color block. I cut long rectangles from whatever scraps accommodated that and then placed + trimmed them to match the finished shorts.
I switched topstitching colors on each section of the waistband. Hems too. I pulled the thread to the back and knotted it instead of backstitching. Fiddly, but I like the result!
I’m actually very pleased with these shorts. They’re longer and a bit looser than I usually wear shorts and there seems to be some excess fabric in the front leg/crotch, but they’re comfortable even when my thighs are given full scope, important for such summertime activities as lying in a hammock, sitting on a picnic bench, etc. And I love these scrap colors together (not totally surprising since I bought them all in the first place). Plus it was $FREE$ (as my dad says, ‘if your time was worthless’).
Also, you may have noticed I have a low-poly paper fox head in these photos??? It’s leftover from Halloween 2020 (I made this one, Professor B.F. made a red one) and I had a case of the why-nots. One way to tell I’ve been blogging for a while – three years ago when we first took photos, I was adamant that no one could even be nearby, and for these I unconcernedly unbuttoned my shorts roughly ten feet away from two plumbers conferencing outside their van while balancing a paper fox mask on my head.
No shame in my game anymore. Woof, arf, assorted fox noises. See you soon!
Pattern: MN Dawn Curve jeans
Pattern cost: NA
Size: 14 waist, 16 hip; 16 rise; with lots of changes
Supplies: leftover denim medley; thread, rivets from stash
Total time: 7.5 hours
Total cost: $0.00