Pajungles

This handsome sonofagun is back and putting my own plain-Jane pajamas to shame! Professor Boyfriend spent most of his twenties wearing variations on mud color, and then one day this wonderfully be-catted fellow just sprang into being and now I’m a peahen. I’m the opposite of complaining!

This is more of a lounge set than strictly pajamas, and it was unplanned. Prof. B.F. picked this sensational leopards-print (as opposed to leopard-print, singular) cotton for a casual summer button-up, but it had been a while since I’d sewn something for him and I couldn’t remember the right yardage, so we got nervous and overbought. After cutting and sewing the shirt I still had about a yard left from the original 2 ¾ yards and I broached the idea of matching shorts.

Backstory, I’ve been hinting about coordinated sets since seeing those made by Emma of Emma’s Atelier (most recently, this one) but Professor Boyfriend wasn’t biting so I pitched these as “cotton sleep shorts”. Prof. B.F. is not a wide guy, but 1 yard of 45” wide fabric wasn’t going to make full-length shorts with all the fixings. I Googled around for free woven boxer patterns but modifying his Jeds pattern seemed easier than printing and assembling an unknown quantity. I was pushing these as pajamas, so it didn’t need a fly opening, and I didn’t have enough fabric for slash pockets, so these were really as simple as could be.

I blended the front pocket into the front leg, and the back yoke into the back leg. I abbreviated both inseams to a 4” finished length and straightened the hem extensions. A quick walking of the seamlines to confirm everything would match, and badda boom, pattern pieces. However, at this point courage failed me and I decided I needed more ease. I retook his measurements and those of the flat pieces; his widest point was 38”, and the pattern was 35”, so I freaked out and added 4” of ease by splitting the front and back legs vertically and adding 1” of width to each.

I now think I measured him wrong, because his commercial pants size is a 34” or 35” waist, and he probably could have wiggled in and out of these without me adding anything. I’m pretty annoyed with myself because I could have used the fabric more efficiently (often a point of pride). I might go back and remove some of that excess, even though that essentially means disassembling 75% of the shorts, just to prove that I can do math.

The waistband is a big old folded rectangle with elastic threaded through it. I learned my lessons from my own PJs and made the casing’s finished width just a smidge larger than necessary. I couldn’t cut it continuously, but I could match the seams with the short’s side seams. I left a bit of each of the short edges of the waistband unsewn so I could attach the whole waistband before adding elastic.

I left this opening on both sides as part of my cunning plan to reach in and untwist the elastic as necessary, but of course this meant the elastic went in without a fuss, so I just had two short seams to hand-sew closed. Which I did…NOT. Hey! It’s ongoingly adjustable!   

The shirt is Professor Boyfriend’s usual short-sleeved Fairfield. When I handed it to him he said “Wow! You pattern-matched across the button placket!” because he is a nice person who pays attention and because DID I EVER. In a stable fabric with a largish repeat like this quilting cotton, it was a straightforward pleasure.

Nothing really to add about this pattern, except that I’ve officially converted to French-seaming the armscyes instead of flat-felling them. I might tweak the sleeve cap next time for a narrower sleeve, but that would be harder to sew. I’ll keep yah posted.

So after this shirt and the matching ‘sleep shorts’ were finished, I convinced Professor Boyfriend to try them on together, and while he originally described them as “very cool pajamas” he might be warming up to the idea of this being an outside-the-house outfit (the shirt has been in public, but the combination hasn’t).  The shorts don’t have any pockets, but I have just enough scrap left to add one bum pocket, and if you can carry your keys you can leave the house, right? I’d want to narrow the legs a bit first to make the bottoms a little less casual, but personally, I think the world is ready. I probably won’t be able to talk him all the way into a romphim, but a set is excellent progress!

And I think he looks meowvelous!

(Forgive me.)

Pattern: Thread Theory Jedediah pants and Thread Theory Fairfield Shirt

Pattern cost: NA

Size: ??? waist = 38.5″ inches stretched, and M

Supplies: 2.75 yards of Leopard in Jungle cotton, $33.00, Gather Here; buttons, Gather Here, $5.10; thread, elastic from stash

Total time: 2 and 5 hours

Total cost: $38.10

Summer Jams

Thanks to general encouragement (especially KK of Magpie Logbook!), I finally sewed myself some fresh summer pajamas.

The pattern is Lisette for Butterick, B6296, and I just noticed it’s sold in the category “Family Sleepwear” which also includes B6338. Begging the question, why didn’t I sew frillybum sleep panniers for the whole family instead?! Oh well. Maybe next time!

My paper copy was in the higher size range, which was necessary for my downstairs, but a little too roomy for my upstairs. The dilemma of the cross-sized! I sewed a 14 top and a 16 bottom. The shirt is exaggerated by design and sewed up easy as pie. The shorts weren’t complicated, but there’s not quite enough vertical space in the back. Two extra inches, one added to the top of the back rise and one to the curved part of the seat seam, would be welcome.

The shorts are wearable as is, but if you’ve been sitting on this pattern (seat pun) and you have a bit of a bum, you might want to add volume. Also, the back yoke is narrowest at center back and is cut on the fold. Odd! Or to put it politely, unique!

By the way, I deeply dislike threading elastic into a waistband. It may technically take less time than sewing a fly, but each minute stings like poison because I hate it, and the elastic twists, and I untwist it, and then it twists again, and I hate it. After an estimated four thousand hours, I finally got the elastic lying flat and stitched a line through the center so it could never twist again. Grrr. Comfy though!

The pocket bags are surprisingly generous – they end about an inch and a half above the hem of the shorts. Next time I would consider trapping them in the cuffs so they can’t flap. I love using cuffs to finish, by the way. It conceals so many raw edges and has a nice weight. Everything else is French seamed because she’s (me’s) worth it.

I’m a little worried that these look like formal radiology scrubs, nice finishing and all. Hopefully the frilly little buttons and the piping help prevent that.

Self-fabric flat piping is sort of the Men In Black: International of piping. Maybe nobody worked that hard on it, but it stills seems like unnecessary effort for something pretty hard to see. Sewing it was good low-stakes practice, though! It’s slightly uneven but even I have trouble spotting that. Originally I planned on a ditsy floral contrast fabric but I eventually opted for monotone, both because it aligned with a traditional masculine aesthetic, aaand because I had a big ol’ free piece of scrap fabric. I still do, actually. This took remarkably little piping. I used straight grain pieces on the shorts legs and bias-cut everywhere else.

The collar directions are basically identical to these from the true indie sew-alike, CC Carolyn pajamas, including the part where you kind of fade the piping into the front + facing seam right before it meets the collar. I was surprised at how easy and tidy this was. And though I was initially hesitant to snip into the collar, it must be snipped in order to finish the center section of the seam allowance in a different direction than the ends, and it actually feels secure! Yay!

I sewed the longer version of the shirt and it was a little bit ghastly. Way too long, it covered the majority of the shorts. Instead of redoing the hem properly, I folded it up as much I could and popped another line of sewing on top. I was limited by the preexisting button hole, but I still got a luxurious deep hem (with a secret bonus hem inside).

Speaking of luxury, I bought the fancy buttons to finish this because I wanted a discreet feminine touch (that sounds like code for something, but it’s not) to balance the overt masculine influence. These bitsy enamel sweethearts were over a dollar EACH. I sewed them on FIRMLY.

Unfortunately, my buttonholes were a little too big and the shirt kept unbuttoning itself. I wore it a couple times that way before deciding that spending five annoying minutes to fix the problem represented better value than the five annoyed seconds per button over and over, forever, and I hand-sewed the buttonholes a scotch smaller.

I think this fabric might be Oxford cotton. It has no wrong side and a tiny moiré diamond pattern made from a darker blue and a white thread. It’s sturdy enough that I skipped interfacing the facings, and it holds its shape well enough that it’s still cool on hot days, no clinging. The cotton had just enough body to make gathering the sleeve cap ease kind of a pain, but it’s pajamas, so let it pucker!

I have slept in these, but they’re at their best as lazy daytime PJs. They make me want to linger in bed with a locked room mystery and a stack of hot buttered toast like an idle Woosterian aunt-botherer. These pajamas mean business! And my business is pajamas!

Good night & good luck!

Pattern: B6296

Pattern cost: $1.00

Size: 14 top, 16 bottom

Supplies: 3 yards of cotton (Oxford?), $14.97, Sewfisticated; buttons, $6.64, Gather Here; thread, $2.39, Michael’s

Total time: 11.75 hours

Total cost: $25.00

Morella Pants

So that was quite a start to the year. Not exactly surprising, but unexpected. I’m talking of course about Joel Kim Booster’s saucy take on Wait Wait, Don’t Tell Me re: men sewing. Just kidding! My capitol got sacked! Anyway – pants!!

I love my normal high, hard, tight pants, but please welcome to the closet, my first pair of woven lounge pants. I sewed them in November (the week of the US election, in fact) and I’ve been wearing them indoors a lot, and outdoors whenever it’s warm enough. These are the Pauline Alice Morella pants. The only version of them seemingly anywhere is a terrific ramie pair by Heathery Makes. She was the first share-r of this pattern and a pants pioneer!

I find my usual pants totally comfortable under usual circumstances, but I was inspired to try the trend for comfy-waist pants because I had shingles. People! Yuck!! In addition to the skin stuff on my belly and back, my nearby lymph nodes hurt like a fresh bruise, and all my pants pressed on both. I sewed these post-shingles (I’m better now, whoo) but it’s nice to have variety.

I picked this pattern because the pockets both intrigued and confused me. I’m lucky that Heather made and shared her pair, because I followed her advice and also because it gave me faith these pockets would work out. I couldn’t visualize the process, not one little bit. That said, it worked great! The first pocket was a fun challenge and a journey of faith that took about an hour. I sewed the second pocket in half that time, and I didn’t need the directions. It’s a cool technique! I like sewing that uses precise measuring and clipping. It’s high-stakes. Perfect for adrenaline junkies. Jason Statham clips to but not through the stitching line, all day, every day. 

I still couldn’t describe precisely how it’s undertaken – definitely one of those things that’s easier to do than say – but here’s my notes. One, yes, you should construct the whole back of the pants first. It seems like a lot of extra fabric to have flapping around, but it’s necessary. Two, when matching the pants front + pocket to the pants back – you need to flip the pocket. I know that doesn’t make sense now, but hopefully it will at the time. It’s not exactly “The only water in the forest is the river”, but flip the pocket.

I sewed the pocket corners in a single pass (as Heather recommended), and I reinforced the corners with a second line of stitching before clipping. This will hopefully keep them intact for a long time to come, and also made it easier to see where to cut. My thread was a perfect match for the wrong side of the fabric. I often try to match from my existing thread rack, but just-right tone-on-tone makes me purr.

I had some uncharacteristic anxiety about the outseam where it meets the pocket opening (hint: it wasn’t actually about the outseam, cough cough election week). I stitched that last inch three or more times. I tried a vertical and horizontal bartack and unpicked both. Eventually I added a rivet, so I wouldn’t keep thinking about popping that corner. I know, rivets in a lounge pant? It’s like walnuts in a brownie (controversial!). But I couldn’t relax in these while plagued by visions of Murray Slaughter ripping off Ted Baxter’s suit pocket. Now I can stick my hands in my pockets worry-free. Next time I sew Morellas I’d like to topstitch the pocket openings, since that edge puffs up a little, but I used self-fabric for the pocket so it’s pretty inoffensive anyway.

The elastic waist was almost my downfall! My piece of elastic was 18” long, 1” shorter than my size called for. I tried several different installation methods, none of which worked (and I had the unpicked threadball to prove it), until I remembered the True Bias Emerson pants technique. It’s simply the best way of adding elastic to a partially-elasticated waistband (mine has a folded, finished edge though)! Plus, if you want to extend the usability of your pants, you can leave extra elastic poking out past the stitch line, un-stretched, hidden by the front facing, and have inches for later. Or you could tighten it later, though that’s never been my direction of change.

I didn’t have wide enough elastic so I zig-zagged two narrower pieces together along their shared length. Predictably, the elastic wants to roll and fold, but I put a vertical line of stitching at the center back, and that keeps it flat.

I also interfaced the front self-facing as per Heather. Excellent suggestion.

The only thing I had to find out for myself was fabric requirements – Pauline Alice only lists yardage for 54” wide fabric, and I really wanted to use this Essex linen/cotton blend (Driftless: Downstream in Roasted Pecan), which is only 45” wide. I sewed a straight size 44. Sidebar, I don’t have the faintest idea of how to grade this pattern through the waist/hips. Anyway, I bought 2 2/3 yards, and I have a good few extra inches. Since I cut the back waistband on the cross-grain, I could have squeaked this out of 2 ½ yards but better safe than sorry! The pattern pieces are a little cumbersome, so I have largish scraps leftover. This fabric is great for lightweight pants (and beautiful, in my opinion), but it might be a little scratchy for masks. I’ll figure out something to use the scraps for, though!

I’d like to make a pair of these in French terry, maybe with cuffs instead of hems. They’re sweat-pants-comfy already, why not add a little sweat-pants-cozy.

Anyway, I know the home sewist is spoiled for choice right now with elastic-waist pants, but I think this pattern has a little something extra. I recommend it! If you try it and you have questions about the pockets, hit me up. And stay comfy out there!

Also – Heather and I both plan on sharing overalls in February, which she’s brilliantly dubbed “Over all this 2020 nonsense”. And I will amend slightly to add “And the first week of 2021 too”. Feel free to join us. 😀

Pattern: Pauline Alice Morella pants

Pattern cost: $9.76

Size: 44; elastic for the waist shortened to 18”

Supplies: 2 2/3 yards of Kaufman Essex cotton/linen; Driftless, Fern in Roasted Pecan, $35.91, Gather Here; thread, $2.09, Michael’s; elastic, rivets from stash

Total time: 6.75 hours

Total cost: $47.76

Summer of Love, Part Five: Farewell, My Lovely

This is my final post in the Summer of Love series. I decided to include one more outfit – not one that got worn publicly much, but one I made just for me!

Luckily I only travelled locally for the weddings etc., but when I did spend a night away from home, I wanted to wear something a bit more fun than my everyday jimjams (I had a sort of instinct that my usual grey tee/sweatpants combo wasn’t maximum festive). Rare Device has a lovely post on investing in the clothes you wear when you’re by yourself, and while self love or care has been monetized almost past recognition, I thought my celebratory PJs were still worthy of being the finale of my Summer of Love. Not to mention I spent several weekends after the binge lounging around and recovering my social appetite and you know I spent that time in pajamas!

This post is a little disingenuous though – because while I made this robe/nightie combo last summer, I didn’t make the robe really truly wearable until the Sewcialists announced the Over/Under theme month. So 1. Oops and 2. Hooray!

The pattern is Seamwork Almada, and I fell for it immediately on its release. Many robes seem to be a collection of rectangles, but I thought the Almada looked like an Erté illustration, like an elegant twenties egg. I also loved the double gauze Seamwork used for their sample. It took me a while to make this pattern since it called for 3 ½ yards of fabric, and I was saving my credit card cashback rewards until I had enough for the big dog – Nani Iro! This is a fabric from her (their?) Rakuen collection.

I sewed a size large, originally with no changes. I was surprised at the Seamwork directions; I assumed that a pattern that called for luxurious fabrics would also call for fine finishing. Especially given that it only has four seams, I would have recommended French seams. They didn’t, but I used them anyway! I also invisibly hand-sewed the bias binding that finishes the opening – easy to do on double gauze, because you can just pick up the inner layer with your needle.    

My favorite homemade bias binding is from this super-soft grey-green-khaki cotton that goes with absolutely everything.

I needed every inch of my yardage – that’s how I ended up with the printed selvage visible inside one sleeve cuff!

I swanned around in my finished robe from time to time, admiring the fabric, but I didn’t use it much as a practical thing. The ties were placed low and wide, buuut so are my hips. The robe required too much arranging and tugging and still wouldn’t stay shut. I wore it as intended for wedding travel because inconsistent coverage was better than none, but after a year of non-use, I FINALLY unpicked and reattached the ties. And only because of Over/Under month!

Half an hour of sewing to move the ties six inches up and six inches towards the center, and now my fancy robe finally fits!

Double gauze is soft and vibrant, it’s like wearing a whisper, and it’s generally easy to sew. When topstitching, however, a friend of mine described it as “like sewing bread”.

Not my neatest sewing ever, but eulalia! I can wear it now!

On the other hand, there’s almost nothing to the nightie – no special saving for fabric, no long-awaited sew, no last-minute rescue. Just a 7” lengthened Ogden cami from leftover fabric I didn’t have quite enough of to make daywear. It’s my all-time favorite summer nightgown.

Love strikes willy-nilly!

Thus concludes my Summer of Love! See you soon, I hope, for more everyday dressing. : )

Previous Summer of Love: here (part one), here (part two), here (part three), and here (part four).

Pattern:  Seamwork Almada

Pattern cost: $3

Size: L, with the ties moved

Supplies: 3.5 yards Nani Iro Gauze in Rakuen Flower, Etsy, $69.20; thread from stash

Total time: 5.5 hours

Total cost: $72.20

Pattern: Ogden cami

Pattern cost: NA

Size: 8 at bust, 14 at hip

Supplies: leftover rayon poplin from stash, thread from stash

Total time: 2.25 hours

Total cost: $0.00